What are the reserved I2C device addresses on the display module?

Q: What are the reserved I2C device addresses on the display module?

Reserved I 2 C devices addresses vary based on the module. Find G2C1 and G2H2 addresses in the tables below. G2C1 Reserved I 2 C Device Addresses [ninja_tables id="15809"] G2H2 Reserved I 2 C Device Addresses [ninja_tables id="15810"] NOTE: Bus 0 is an internal I 2 C bus. Bus 1 is available on connector J21 (full-stuff modules only).

Reserved I²C devices addresses vary based on the module. Find G2C1 and G2H2 addresses in the tables below.

G2C1 Reserved I²C Device Addresses

Address	Device	Description
0x38	PCAP Controller	PCAP controller on touch screen flex cable (if installed).
0x3E	GPIO Port Expander	GPIO port expander attached to GPIO port on connector J8.
0x55	PCAP Controller	PCAP controller on touch screen flex cable (if installed) (alt.).
0x68	RTC	Real-time clock module.

G2H2 Reserved I²C Device Addresses

Address	Device	Description
0x0A	CODEC
0x1D	Temp Sensor
0x38	PCAP Controller	PCAP controller on touch screen flex cable (if installed).
0x3E	GPIO Port Expander	GPIO port expander attached to GPIO port on connector J8.
0x68	RTC	Real-time clock module.

NOTE: Bus 0 is an internal I²C bus. Bus 1 is available on connector J21 (full-stuff modules only).